Drum Vents, Taps & Locks

FM approved Drum Vents. No more worrying about pressure building up in your drums. These safety drum vents automatically relieve pressure between 3 and 8 psi (30 to 55 kPa).  Vents are tested to allow 60 cubic inch (1-L) of water through a 9.5mm pipe nipple in less then 6 seconds.  Keep the vent in closed position to prevent flammable vapor from...

FM approved Drum Vents. No more worrying about pressure building up in your drums. These safety drum vents automatically relieve pressure between 3 and 8 psi (30 to 55 kPa).  Vents are tested to allow 60 cubic inch (1-L) of water through a 9.5mm pipe nipple in less then 6 seconds.  Keep the vent in closed position to prevent flammable vapor from escaping.  A built-in flame arrester helps absorb and dissipate heat for added safety. Vaccum relief is automatic on vertically installed vents and manual on horizontially installed vents. 

FM approved Drum Taps. Simple place these taps on your drum for leakproof dispensing of flammable liquids.  Faucets feature an internal flame arrester that prevents flashback of fire into the drum for added safety.  Brass construction with a polytetrafluoroethylene (PTFE) seal ensures excellent chemical resisitance.  Take the worry out of awkard spout position with adjustable models 08910 and 08916. They feature a coupling nut that provides rotation of the spout downward after the faucet is threaded in place.  Use model 08552 for viscous noncorrosive flammables such as adhesives, paint or heavy oils above 2000 SSU (about 30W oil).

Drum Locks Safely secure drum contents without the risk of contamination.
Keep your durm contents safe from theft, sabotage and contamination with these drum locks.  Locks intall easily around the bung flange without the need to remove the original bung.  Make of corrosion resistant, non sparking die cast.

 

More

Drum Vents, Taps & Locks There are 11 products.

Showing 1 - 11 of 11 items
Showing 1 - 11 of 11 items